{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM Form E 6HX, AlTiX, M: M16
Article no.: 136152 M16
Article code:
Product details
Technical Data
| Thread type | M | |
| Tool material | HSS-E-PM | |
| Coating | AlTiX | |
| Thread D | M16 | |
| Thread pitch | 2 mm | |
| Core hole diameter | 14 mm | |
| Nominal diameter of metric thread D | 16 mm | |
| Overall length L | 110 mm | |
| Shank diameter DS | 12 mm | |
| Square-drive width across flats □ | 9 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | E | |
| Application for type of drilling | blind hole | |
| Twist angle | 40 degrees | |
| Standard | DIN 376 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01202105 | |
| Holder shape | smooth shank with square drive | |
| Holder version | metric | |
| Holder size, metric | 12 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h9 | |
| Length of shank LS | 60 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer HSS-E-PM Form E 6HX | |
| Cutter diameter D | 16 mm | |
| Number of thread turns | 1 | |
| Chisel edge diameter | 13.8 mm | |
| Length of tapping part Lc | 23.8 mm | |
| Tap infeed length | 3 mm | |
| Taper lead angle | 20.1 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Core hole diameter guideline value | 14 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | no | |
| Normlänge L | 110 mm | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Interface | joint 1 | |
| Usable length L1 | 40 mm | |
| Weight | 101 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 136152 M16 | |
| EAN / GTIN | 4045197900289 | |
| Manufacturer number | 136152 M16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
22
N
25
N
15
P
22
P
22
P
18
P
8
P
6
M
7
M
6
K
15
N
15
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
Form E (1.5-2 turns lead chamfer)
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Form E (1.5-2 turns lead chamfer)