{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide machine tap, TiAlN, G: G1/8
Article no.: 133320 G1/8
Copy
Article code:
Copy
- Thread type: G
- Flank angle: 55
- Tool material: VHM
- Standard: DIN 371
- Taper lead form: D
Product details
Technical Data
| Thread size | G1/8 | |
| Coating | TiAlN | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | VHM | |
| Standard | DIN 371 | |
| Taper lead form | D | |
| Shank | Parallel shank to h6 | |
| Through-coolant | no | |
| Application for type of drilling | up to 1.5×D for blind holes; up to 2×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9.73 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 5 | |
| Colour ring | red | |
| Number of cutting edges Z | 5 | |
| Thread depth | 14.6 mm | |
| Type of product | Tap |
Identification & Classification
| Article number |
133320 G1/8
Copy |
|
| EAN / GTIN |
4045197074577
Copy |
|
| Manufacturer number |
133320 G1/8
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
H
ISO code:
3
suitable for / [m/min]
H
ISO code:
2
suitable for / [m/min]
H
ISO code:
1
suitable for / [m/min]
H
ISO code:
1
suitable for / [m/min]
H
ISO code:
5
suitable for / [m/min]
H
ISO code:
4
suitable for / [m/min]
H
ISO code:
3
suitable for / [m/min]
N
ISO code:
18
suitable for / [m/min]
Description
Version:
Especially sturdy design.
For use in heavy duty applications.
For use in heavy duty applications.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Recommendation:
For very hard steels, TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3mm larger. For use only with a length compensation chuck − even on machines with synchronised spindle drives.