{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap HSS-E, TiCN, M: M3
Article no.: 132450 M3
Article code:
Product details
Technical Data
| Thread type | M | |
| Tool material | HSS-E | |
| Coating | TiCN | |
| Thread D | M3 | |
| Thread pitch | 0.5 mm | |
| Core hole diameter | 2.5 mm | |
| Nominal diameter of metric thread D | 3 mm | |
| Overall length L | 56 mm | |
| Shank diameter DS | 3.5 mm | |
| Square-drive width across flats □ | 2.7 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Application for type of drilling | through hole | |
| Twist angle | 0 degrees | |
| Standard | DIN 371 | |
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Maschinen-Gewindebohrer HSS-E M M3 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00352105 | |
| Length of shank LS | 33 mm | |
| Chisel edge diameter | 2.4 mm | |
| Length of tapping part Lc | 12 mm | |
| Tap infeed length | 1.5 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Recommended maximum drilling depth L2 | 6 mm | |
| To depth (x diameter) | 2 | |
| Number of clamping slots | 3 | |
| Flank angle | 60 degrees | |
| Machining group | P (steel) | |
| Interface | joint 1 | |
| Gauge length A | 56 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | pink | |
| Type of product | taps |
Identification & Classification
| Article number | 132450 M3 | |
| EAN / GTIN | 4045197071637 | |
| Manufacturer number | 132450 M3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
16
P
20
P
19
P
19
M
8
M
6
S
4
S
2
N
16
Description
Version:
Strong spiral point. Guide section with oil grooves, but without chip flutes.
Particularly suitable for difficult to machine steels up to 850 N/mm2.
For use with emulsion (fat content minimum 8%).
Particularly suitable for difficult to machine steels up to 850 N/mm2.
For use with emulsion (fat content minimum 8%).
Advantage:
Particularly strong, optimum self-guidance and no recutting when reversed.