Hoffmann Group Home
  • 500.000 listed articles
  • Highest delivery accuracy
  • TÜV certified quality of delivery
      • Menu
      Article no.: 231617

      HiPer-Drill base body 10×D

      Brand: GARANT
      Use for drilling limited cross-drilling
      Skaft ISO 9766
      Through-coolant Yes
      Use for drilling limited drilling through a stack
      Use for drilling limited oblique spot drilling
      Use for drilling limited drilling with oblique exit
      Drill depth up to 10×D

      HiPer-Drill base body 10×D

      In stock
      Unit price
      from  $ 465.93
      plus VAT at the current rate Prices plus delivery costs



      • Very high feed rates and maximum performance due to optimally matched geometries and materials.
      • Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
      • High concentricity when assembled.
      • Shank support for optimum stability in operation.

      Polished flutes.


      For stationary and rotating use. For holes up to IT9 accuracy.


      Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
      For optimum stability, clamp the drill so the overhang is as short as possible.
      The insert screw must be replaced after every fifth change of cutter insert.
      Further sizes up to ⌀ 50.99 mm available on request.
      Reduce feed rates f by 10% and vc values by 30%.
      For process reliability when using the drill, initial pilot drilling to 1.5xD with the drill No. 231600 with the same cutter insert size is necessary. The generation of a pilot hole improves process reliability.

      Technical Data

      Drill depth up to
      Use for drilling
      limited cross-drilling ; limited drilling through a stack ; limited drilling with oblique exit ; limited oblique spot drilling 
      ISO 9766