{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
One-handed clamp EZL 600/80
Nr art.: EZL60-8
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Clamp |
Identyfikacja i klasyfikacja
| Numer artykułu | EZL60-8 | |
| EAN / GTIN | 4008158041179 | |
| Numer producenta | EZL60-8 | |
| Numer L | L80030 403 | |
| Producent/osoba odpowiedzialna | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Opis
Opis:
- Clamping force up to 2,700 N
- Conversion for spreading – tool-free with EZM, EZL, EZXL thanks to simple release mechanism at the touch of a button on the top section
- Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
- Protective caps with cross prism on the top for securely holding round, pointed and angular parts
- One-handed operation with little effort required
- On carded hang pack
Cecha szcz.:
- Overhead: 80 mm
- Material / surface:
- Rail made of steel hardened, burnished
- Lever made of reinforced PA6 plastic
- Upper and lower part made of reinforced PA6 plastic
- Plastic protective caps
- Rail: 18x5 mm
- Clamping force: 1400 N
- Wingspan: 600 mm
- Spreading second: 160-750 mm
Zaleta:
Multiple applications
- The one-handed EZ range offers numerous possible applications:
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
- The entire range offers ergonomic handling, thanks to sophisticated technology:
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
- Modern aesthetics meet with longevity here:
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the plastic housing, the grip mechanism is protected from dust and chips
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
Zastosowanie:
- Interior fittings
- DIY
- Furniture and joinery works
- Staircase construction
- Dry construction
- Kitchen construction and shop fitting
- One-handed clamping and spreading
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents