{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
PFERD TOOLS POLINOX non-woven unmounted grinding wheel PNL dia. 200x50 mm centre hole dia. 44 mm A100 for fine grinding and finishing
Nr art.: 4007220479698
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Flap wheel roller fabric, slit |
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220479698 | |
| EAN / GTIN | 4007220479698 | |
| Numer producenta | 44644211 | |
| Numer L | L51100 46 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Opis:
- POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated.
- The non-woven abrasive flaps are arranged radially.
- A long tool life is achieved through the dense packing of the flaps.
- This tool is mainly used for work on large surfaces.
- PFERD TOOLS ERGONOMICS recommends POLINOX unmounted grinding wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.
Cecha szcz.:
- Max. RPM: 3000 RPM
- RPM, optimum: 1500 RPM
- Width, metric: 50 mm
- Dia. hole: 44 mm
- Abrasive: Aluminium oxide A
- Dia. external, metric: 200 mm
- Dia. thread: 0
- Grit size: 100
Zaleta:
- Highly flexible, enabling optimal adjustment to the contour.
- Cool grinding and low thermal load on the workpiece.
- The open structure and high flexibility of the non-woven material prevents tool clogging.
Zastosowanie:
- Recommendations for use: For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
- Applications: Cleaning; Deburring; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work
- Drive types: Bench grinder; Flexible shaft drive; Straight grinder
Materiał:
- Materials that can be worked:
- Aluminium
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc
W dostawie:
- Please order compatible arbor separately.
Wskazówka:
- The maximum permitted peripheral speed is 32 m/s.