{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
PFERD TOOLS Diamond grinding point cylindrical slim dia. 14x1.0 mm shank dia. 3 mm D64 (fine) for grinding grooves
Nr art.: 4007220353264
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Opis formy | Kształt walcowy | |
| Średnica głowica | 14 mm | |
| Długość chwytu | 35 mm | |
| Uchwyt | Chwyt | |
| Średnica otworu | 14 mm | |
| Stopień rozdrobnienia | drobne | |
| Spoiwo | Galwanicznie | |
| Rodzaj produktu | Ściernica trzpieniowa | |
| Rozmiar ziarna (mikrometry) | 64 µm | |
| Do materiału | Szkło; Z węglików spiekanych; Ceramika | |
| Możliwość użycia do | Zeszlifowanie |
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220353264 | |
| EAN / GTIN | 4007220353264 | |
| Numer producenta | 36051416 | |
| Numer L | L51170 54 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Opis:
- Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
- The special shape ZY is suitable for grinding slits and grooves in hard-to-reach areas.
- N = non-stepped shank
- PFERD TOOLS ERGONOMICS recommends diamond grinding points as an innovative tool solution to sustainably reduce the dust produced during use.
- PFERD TOOLS EFFICIENCY recommends diamond grinding points for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
Cecha szcz.:
- Width, metric: 1 mm
- Dia. external, metric: 14 mm
- Dia. shank, metric: 3 mm
- Grit size: D 64
- Length, shank: 35 mm
Zastosowanie:
- Recommendations for use: Application is possible for both dry and wet grinding. If possible, wet grinding is to be preferred in order to reduce tool wear and the risk of thermal damage. Generally, the following applies: For optimum economic efficiency, select a grit size that is as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the surface quality required. Loaded tools can be cleaned using ultrasound. In the event of strong contamination on the coating, please clean using the sharpening block DSB 2005025 (EAN 4007220168332). Select as large a tool diameter as possible, as this increases the amount of grit that engages the workpiece. For internal grinding, the maximum tool diameter is 3/4 of the diameter to be ground. The longitudinal feed rate for internal grinding must not exceed 2/3 of the total width per workpiece rotation. The infeed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive. Because of the monolayer coating, the drive spindle and tool mounting must have a high concentricity. The finer the grit size used, the more accurate the concentricity needs to be. The tool drive must have sufficient drive output on the grinding spindle to ensure the required rotational speed, even under load. Dry grinding: 8–18 m/s Wet grinding: 15–25 m/s
- Applications: Cutting; Cutting out holes; Grinding out
- Drive types: Flexible shaft drive; Tool machine; Straight grinder
Materiał:
- Materials that can be worked:
- Abrasive materials
- Ferrite (magnetic material)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Technical ceramics
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Technical ceramics; Tungsten carbide
W dostawie:
- Customer-specific tool solutions are available on request.