{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
PFERD TOOLS POLIROLL PRK conical cartridge rolls dia. 15x35 mm hole dia. 3 mm aluminium oxide A150
Nr art.: 4007220152607
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Materiał ścierny | Korund zwykły (A) | |
| Zalecana prędkość obrotowa | 10 000 min-1 | |
| Maks. prędkość obrotowa | 15 000 min-1 | |
| Średnica otworu | 3 mm | |
| Średnica | 15 mm | |
| Opis kształtu | Kula | |
| Jednostka napędowa | Szlifierka prosta | |
| Uziarnienie | 150 | |
| Materiał do obróbki | INOX; Wszystkie metale | |
| Rodzaj produktu | Wałek polerski |
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220152607 | |
| EAN / GTIN | 4007220152607 | |
| Numer producenta | 42821515 | |
| Numer L | L51100 783 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Opis:
- For general grinding work on metals and other materials.
- POLIROLL cartridge rolls consist of spirally wound, coated abrasives.
- The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.
Cecha szcz.:
- Max. RPM: 15000 RPM
- RPM, optimum: 10000 RPM
- Abrasive: Aluminium oxide A
- Dia. external, metric: 15 mm
- Grit size: 150
- Height: 35 mm
Zaleta:
- Consistently high grinding performance throughout its entire tool life thanks to ongoing exposure of fresh abrasive grain during application.
- Secure fit when in use due to self-tensioning provided by grooved, conical arbor.
- Easy tool change.
Zastosowanie:
- Recommendations for use: Grind with the point rather than the flat surface so as not to damage the bond through the effect of heat. Mount POLIROLL with the bonded side facing towards the arbor. Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
- Applications: Deburring; Step-by-step fine grinding; Leveling; Sharpening; Work on weld seams; Working on edges
- Drive types: Flexible shaft drive; Straight grinder
Materiał:
- Materials that can be worked:
- Annealed cast iron
- Brass
- Cast steel
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Materials that can be worked: Annealed cast iron; Brass; Cast steel; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium
Wskazówka:
- The maximum permitted peripheral speed is 11 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.