{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Kaseta z wiertłami ∙ 25-częściowy ∙ ⌀ 1 – 13 mm ∙ rosnąco co 0,5 mm
Nr art.: 2128N-1
Nr własny produktu:
- Norma: DIN 338
- Tolerancja ⌀ nominalnej: h8
- kąt wierzchołkowy: 118
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Norma | DIN 338 | |
| Tolerancja ⌀ nominalnej | h8 | |
| kąt wierzchołkowy | 118 stopni | |
| w kasecie, | tak | |
| Rodzaj produktu | Jobber drill |
Identyfikacja i klasyfikacja
| Numer artykułu | 2128N-1 | |
| EAN / GTIN | 4000896218844 | |
| Numer producenta | 2128N-1 | |
| Numer L | L60140 4460 | |
| Producent/osoba odpowiedzialna | HAZET-WERK Hermann Zerver GmbH & Co. KG, Güldenwerther Bahnhofsstraße 25-29, 42857 Remscheid, Deutschland, www.hazet.com |
Opis
Opis:
Application:
Drilling machines and drill stands with round shank drill holder.
Case-hardened steel ∙ grey cast iron ∙ cast iron ∙ cast steel ∙ rigid plastic ∙ heat-resistant steel ∙ cold-worked steel ∙ plastic ∙ alloyed steel (up to 900 N/mm² solidity) ∙ non-ferrous metal ∙ stainless steel ∙ acid-resistant steel ∙ sintered iron ∙ steel casting ∙ malleable iron ∙ unalloyed steel ∙ tempered steel ∙ hot steel
Drilling machines and drill stands with round shank drill holder.
Case-hardened steel ∙ grey cast iron ∙ cast iron ∙ cast steel ∙ rigid plastic ∙ heat-resistant steel ∙ cold-worked steel ∙ plastic ∙ alloyed steel (up to 900 N/mm² solidity) ∙ non-ferrous metal ∙ stainless steel ∙ acid-resistant steel ∙ sintered iron ∙ steel casting ∙ malleable iron ∙ unalloyed steel ∙ tempered steel ∙ hot steel
- Save time and energy: The HSS twist drills enable rapid drilling with less contact force than conventional drills
- Powerful, precision-ground twist drills made of high performance HS steel (HSS)
- Self-centring drill bit with taper surface grinding according to DIN 1412 ∙ 118° point angle ∙ perfect centring without centre punch or wandering
- Two cutting edges and two spiral grooves remove the chip quickly and extend the use life
- Long use life (service life), excellent wear resistance thanks to robust core thickness and emphasised hardness (surface finish) for the working area
- Cylindrical shaft (shaft diameter corresponds to drill diameter) ∙ Diameter tolerance h 8 ∙ Highest precision (increased concentric accuracy)
- 25-piece, ⌀ 1 - 13 mm increasing by 0.5 mm: 1 drill each x ⌀ 1.0 ∙ 1.5 ∙ 2.0 ∙ 2.5 ∙ 3.0 ∙ 3.5 ∙ 4.0 ∙ 4.5 ∙ 5.0 ∙ 5.5 ∙ 6.0 ∙ 6.5 ∙ 7.0 ∙ 7.5 ∙ 8.0 ∙ 8.5 ∙ 9.0 ∙ 9.5 ∙ 10.0 ∙ 10.5 ∙ 11.0 ∙ 11.5 ∙ 12.0 ∙ 12.5 ∙ 13.0 mm
- Right hand cutting
- DIN 338