{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
CAP blind rivet nuts aluminium small head M 6 x 9 x 21.5, 250 pieces
Nr art.: 1464117
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Powierzchnia | gładkie | |
| Zawartość | 250 szt. | |
| Rodzaj produktu | Nitonakrętka | |
| Rodzaj gwintu | Metryczny gwint zwykły ISO | |
| Materiał | aluminium |
Identyfikacja i klasyfikacja
| Numer artykułu | 1464117 | |
| EAN / GTIN | 5013656413327 | |
| Numer producenta | 1464117 | |
| Numer L | L70291 102466 | |
| Producent/osoba odpowiedzialna | SFS Group Germany GmbH Division Medical - GESIPA, Nordendstraße 13-39, 64546 MÖRFELDEN-WALLDORF, Deutschland, www.gesipa.de |
Opis
Opis:
Blind rivet nuts Advantages at a glance:
Terminology:
- Quick and easy installation with access to components from one side
- Placement of high-quality threads in thin and soft materials (steel, aluminium, magnesium, plastics, etc.)
- No thermal effects on the components and therefore no heat distortion or damage to the surfaces of the components. No reworking is therefore necessary
- Very high flexibility of the manufacturing process
- Low investment in assembly equipment
- Versatile. Also suitable for hybrid connections and soft materials.
- Creation of water- and gas-tight connections
- No emission of heat, smoke or welding fumes into the environment, and therefore no adverse effects (hazards) to people or the environment
Terminology:
- The setting head is the part of the blind rivet nut that rests on the visible side of the component. The user can choose between the following variants:
- Flat head - for a large contact surface on the component
- Small head – for minimal protrusion of the blind rivet nut and thus an almost flat contact surface of the assembly part
- Countersunk head – for flat surfaces with countersunk holes
- The shaft is the part of the blind rivet nut that deforms during the setting process and fixes the blind rivet nut in the component. This creates the so-called closing head. The user can choose from the following variants: Round, knurled or polygonal (hexagonal or square)
- The material: The customer can obtain the blind rivet nut in steel, aluminium or stainless steel (A2, A4) depending on the application.
- The thread: The blind rivet nuts are equipped with metric threads as standard, with the steel blind rivet nuts meeting the requirements of strength class 8.8. Other dimensions, such as imperial or coarse threads, are available on request.
Cecha szcz.:
- Diameter of the shaft: 9 mm
- Threaded insert: 6
- Thread length: 9 mm