{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Digital current clamp, Manufacturer's designation: CMP2
Article no.: 473305 CMP2
Article code:
Product details
Technical Data
| Number of batteries contained | 2 pcs. | |
| Type of battery | alkaline-manganese (AlMn) | |
| International size | AAA (LR3) | |
| Manufacturer’s designation | CMP2 | |
| Power supply | battery-powered | |
| Current clamp opening max. | 23 mm | |
| Measurement techniques | TRUE RMS | |
| Alternating current (AC) min. | 10 mA | |
| Alternating current (AC) max. | 400 A | |
| Direct current (DC) min. | 10 mA | |
| Direct current (DC) max. | 400 A | |
| DIsplay | LCD | |
| Illuminated display | yes | |
| Automatic power-off | yes | |
| Displayable number max. | 4,200 | |
| Basic accuracy | 2 % | |
| Type of product | current clamp | |
| Measurement variants | voltage measurement; non-contact voltage sensor | |
| Type of current | dC current; aC current | |
| With cable | yes | |
| With display | yes | |
| Overvoltage category | CAT III | |
| Characteristics | contactless detection of broken cables | |
| Function | Hold | |
| Standard | IEC / EN 061010-1 | |
| Material of the housing | Plastic | |
| Can be calibrated | yes |
Identification & Classification
| Article number | 473305 CMP2 | |
| EAN / GTIN | 4014651446793 | |
| Manufacturer number | 044679 | |
| Manufacturer/responsible person | BENNING GmbH & Co. KG, Münsterstraße 135-137, 46397 Bocholt, Germany, www.benning.de |
Description
Version:
Robust and ergonomic plastic casing with illuminated LCD display. Reliable AC and DC measurements without breaking the operating circuit. Recording of measured value and maximum value, relative measurement.
Application:
Digital service multimeters for a wide range of applications. These provide a high level of safety and other additional functions.
Very high resolution of 10 mA AC in the 40 A measurement range. Integral Volt sensor (NCV) provides non-contact phase voltage signals and detects broken leads in cables (visual/acoustic). Inrush current measurement (INRUSH), low-pass filter (LPF), ZERO function.
Standard:
IEC / EN 061010-1 (DIN VDE 0411-1).
Supplied with:
Batteries, probe leads, compact protective case, operating instructions.