{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TPCT 1003PDR, IC808, Type: ST900
Article no.: 226504 ST900
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | HELI3MILL | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HM390 TPCT 1003PDR IC808 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | triangular | |
| Blade thickness | 3,18 mm | |
| Insert length | 10 mm | |
| Insert version | neutral | |
| Cutting edge length | 10 mm | |
| Corner radius | 0,8 mm | |
| Corner angle | 60 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| ISO-Code | TPKT 1003PDR | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Coating | coated | |
| Insert thickness | 3,18 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | TPCT 1003PDR | |
| Insert designation | TPKT 1003PDR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 3 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1,5 |
Identification & Classification
| Article number | 226504 ST900 | |
| EAN / GTIN | 7291075313642 | |
| Manufacturer number | 5607516 |
Application Table
P
300
P
280
P
260
P
240
P
220
Description
Version:
Trigon indexable insert with 3 helical cutting edges. Axial and radial positive cutting edge design. For effective and precise machining of 90° shoulders.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 8.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.