{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
KOMET® M03Speed micro-adjustment head, ⌀ Dmin: 29mm
Article no.: 238370 29
Article code:
- Shank: ABS
- Use for drilling: Cross-drilling; convex; oblique exit
- Through-coolant: yes
Product details
Technical Data
| Minimum ⌀ Dmin | 29 | |
| Shank | ABS | |
| Use for drilling | Cross-drilling; convex; oblique exit | |
| Through-coolant | yes | |
| Boring range ⌀ | 29 mm - 39 mm | |
| Reach L1 | 39.9 mm | |
| ABS® shank ⌀ Ds | 25 | |
| Cutter circle ⌀ D2 forwards machining | 26 mm | |
| Coarse adjustment travel S | 5 mm | |
| Fine adjustment in ⌀ | 0.4 mm | |
| maximum speed | 40,000 min-1 | |
| Blade carrier | 238355 29 | |
| Type of product | Boring tool |
Identification & Classification
| Article number | 238370 29 | |
| EAN / GTIN | 4047109074620 | |
| Manufacturer number | M03 00515 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 BESIGHEIM, Germany, www.kometgroup.com |
Description
Version:
- Dynamic balance in the slide for highest speeds.
- Modular system structure.
- Fine adjustment without additional clamping.
- With ABS® connection for highest changeover accuracy.
- Quick rough adjustment by adjusting the lathe tool.
- Internal coolant supply directed to the cutting edge.
- Smallest adjustment steps in the µm range, within a fine adjustment range of 0.25 - 0.6 mm on the ⌀, depending on the turning range.
- Fine adjustment steps of 0.002 mm per graduation in ⌀.
- High resolution ensures problem-free adjustment / readability without a vernier.
Note:
Additional insert holders, e.g. for reverse machining and with other angles = 15°, 30°, 45° etc. available on short lead times.
Please order change-over adapters, cartridges, and indexable inserts separately.
Please order change-over adapters, cartridges, and indexable inserts separately.