{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.º de cat.:
Elemento básico SUMOCHAM Mango Weldon DCN A, 8×D, Tamaño: 6
Número de artículo: 231715 6
Código del artículo:
Detalles de producto
Datos técnicos
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | DCN A; DCN 060-048-12A-8D | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | straight clamping flat with locking thread | |
| Holder version | metric | |
| Holder size, metric | 0120 mm | |
| Shank diameter | 12 mm | |
| Shank length | 45 mm | |
| Shank type | HB | |
| Cutter diameter, min. | 6 mm | |
| Cutter diameter, max. | 6.4 mm | |
| Body diameter | 16 mm | |
| Collar diameter | 16 mm | |
| Flute length | 48.96 mm | |
| Number of cutting edges, total | 2 | |
| Angle, 1st step | 180 degrees | |
| Guide elements | without guide elements | |
| Insert designation | ICP; ICP 060 | |
| Interface | joint 1 | |
| Gauge length | 48 mm | |
| Usable length | 48.96 mm | |
| Overall length | 107 mm | |
| Functional length | 60.91 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identificación y clasificación
| Número de artículo | 231715 6 | |
| EAN / GTIN | 7291075291957 | |
| Número del fabricante | 3203269 |
Descripción
Version:
SUMOCHAM interchangeable head drilling system for highly efficient drilling with interchangeable drilling heads. Unique clamping mechanism for convenient fixing of the drilling head without additional clamping screw. Versatile material use due to comprehensive drilling head range. Optimum tool stability with twisted coolant channels for high concentricity and lowest possible axial run-out of the bore. Other available versions: base body with round shank, base body for machining chamfers on bores when a chamfer ring is attached, base body especially for use in multi-spindle, sliding headstock and production lathes.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Application:
Supplied with:
Drill body incl. assembly key for drilling heads.
Note:
- Always select a strategy with medium cutting speeds and high feed rates.
- No rapid traverse and no spindle anti-clockwise rotation during retraction.
- For drilling depths of 8×D and more, piloting of at least 1.5 × DC with
same cutter insert required. - Drilling convex / concave surfaces: Radius of curvature > 15 × DC required, reduce feed rate by up to 50%.
- For cross holes, the maximum permissible diameter is 1/4 of the nominal diameter DC.
- Stack drilling requires stable conditions, reduce gaps between workpiece elements.
- Oblique drill entry and exit up to 7° inclination possible with reduced feed rate (approx. 20 - 30%).
- Designation convention 8×D: DCN [size]-[L1]-[⌀DS]A-[L/D]
- Designation convention 12×D: DCN [size]-[L1]-[ØDS]R-[L/D]
- Examples:
No. 231715 6 DCN 060-048-12A-8D
No. 231720 8 DCN 080-096-12R-12D