{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Ball nose slot drill HSS-PM, TiAlN, ⌀ e8 DC: 2mm
Article no.: 194302 2
Copy
Article code:
Copy
- Tool material: HSS PM
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
- Helix angle: 30
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 4 mm | |
| Radius R | 1 mm | |
| Overall length L | 48 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for copy milling in steel < 750 N/mm2 | 0.006 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification & Classification
| Article number |
194302 2
Copy |
|
| EAN / GTIN |
4045197110039
Copy |
|
| Manufacturer number |
194302 2
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
138
suitable for / [m/min]
N
ISO code:
110
suitable for / [m/min]
P
ISO code:
83
suitable for / [m/min]
P
ISO code:
64
suitable for / [m/min]
P
ISO code:
64
suitable for / [m/min]
P
ISO code:
37
suitable for / [m/min]
P
ISO code:
32
suitable for / [m/min]
M
ISO code:
23
suitable for / [m/min]
M
ISO code:
18
suitable for / [m/min]
K
ISO code:
55
suitable for / [m/min]
N
ISO code:
110
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Centre cutting edge geometry for plunging.
For the most demanding metal removal rates.
For the most demanding metal removal rates.
Note:
For milling concave slots or for milling radius transitions.
Suitable for use as a copy mill and for mould making.
fz for ap 0.05×D.
Suitable for use as a copy mill and for mould making.
fz for ap 0.05×D.