{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Machine tap for synchronised spindles HSS-E-PM Form C, TiAlN, M: M3
Article no.: 135410 M3
Copy
Article code:
Copy
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M3 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Helix angle | 40 degrees | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2.5×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.5 mm | |
| Overall length L | 70 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank square □ | 4.9 mm | |
| Tapping hole ⌀ | 2.5 mm | |
| Thread ⌀ | 3 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Number of clamping slots | 3 | |
| Colour ring | red | |
| Number of cutting edges Z | 3 | |
| Thread depth | 7.5 mm | |
| Type of product | Tap |
Identification & Classification
| Article number |
135410 M3
Copy |
|
| EAN / GTIN |
4045197446282
Copy |
|
| Manufacturer number |
135410 M3
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
32
suitable for / [m/min]
P
ISO code:
20
suitable for / [m/min]
P
ISO code:
12
suitable for / [m/min]
P
ISO code:
7
suitable for / [m/min]
H
ISO code:
7
suitable for / [m/min]
H
ISO code:
3
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Sturdy version with right-hand helix and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is guided by the synchronised spindle on the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%).
Recommendation:
For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3mm larger.