{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Chisel and taper pin punch set in a plastic holder special quality, Number of tools: 6
Article no.: 745100 6
Article code:
Offers
Product details
Technical Data
| Number of tools | 6 | |
| Application type | hand-operated | |
| Colour | red | |
| Content | set | |
| Type of product | chisel | |
| Shape of shank | octagon | |
| Type of striking head | annealed | |
| Tip hardness in HRC | 59 | |
| Surface | chrome-plated | |
| Material | extra chromium vanadium steel, special quality | |
| Characteristics | chip-free | |
| Handle | no grip/ handle available |
Identification & Classification
| Article number | 745100 6 | |
| EAN / GTIN | 7610733086863 | |
| Manufacturer number | 855.BL |
Description
Version:
Flat and cross-cut chisels for metal, and taper pin punches and centre punches with octagonal shanks, through hardened; chisels can be reground many times. Head specially annealed to prevent splintering.
Special quality = Highest possible point hardness − approx. 59 HRC − with exceptional toughness.
Special quality = Highest possible point hardness − approx. 59 HRC − with exceptional toughness.
Material:
Extra chrome vanadium steel, chrome-plated.
Content:
Centre punch: 1 pc. 120×12 mm
Taper pin punch: 1 pc. each ⌀ 4; 5 mm
Flat cold chisel: 1 pc. each 165; 180 mm
Cross-cut cold chisel: 1 pc. 165 mm
Taper pin punch: 1 pc. each ⌀ 4; 5 mm
Flat cold chisel: 1 pc. each 165; 180 mm
Cross-cut cold chisel: 1 pc. 165 mm