{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Puller clamping w.220mm x clamping d.170mm
Article no.: 71035102
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 71035102 | |
| EAN / GTIN | 4018754342068 | |
| Manufacturer number | 71035102 | |
| Manufacturer/responsible person | STAHLWILLE Eduard Wille GmbH & Co. KG, Lindenallee 27, 42349 WUPPERTAL, Germany, www.stahlwille.de |
Description
Description:
- For quick and safe removal of gears, ball bearings, pulleys and for extracting ball bearing outer rings and bushes from bores.
- The hook ends have a narrow and wide design and can therefore be used on both sides.
- Automatic pressing of the hooks under load makes application easier.
- Accurate profile ribs and precise guide rails give the truss an extremely high bending stiffness.
- Nitrided surface of the pressure spindle ensures excellent gliding properties and requires no additional lubrication.
- three-armed
- with self-centring puller arms
- for removing gears, ball bearings, pulleys and similar parts from a shaft or axle
- Use of the trigger hooks on both sides: Narrow hook end (20 mm) for tight installation spaces, wide hook end (24 mm) with slot (8 mm) for removing discs or gears with the aid of 8 mm screws
- Nitrided spindle, no oiling necessary, maintenance-free
- Galvanised
Feature:
- External drive hexagon (mm): 19 mm
- Thickness of hooked toe mm (a): 3 mm
- Hook base width mm (b): 24 mm
- Hook foot depth mm (c): 12 mm
- Size: 2
- Number of hooks: 3
- max. loading: 7.5t
- Clamping depth (h) mm: 170 mm
- Spindle thread size: M18 x 1.5 x 170
- Span mm (w): 220 mm
- Weight (g): 3200g