{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Hole saw, bi-metal, Diameter: 41mm
Article no.: 589010 41
Article code:
Product details
Technical Data
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | 5/8 -18 UNF | |
| Type of mounting | tapped hole | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Lochsäge Bimetall | |
| Cutter diameter, min. Dc min. | 41 mm | |
| Cutter diameter, max. Dc max. | 41 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Application for type of drilling | through hole | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | Bimetall | |
| Interface | joint 1 | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | hole saw | |
| Recommended maximum drilling depth | 38 mm | |
| Content | single part |
Identification & Classification
| Article number | 589010 41 | |
| EAN / GTIN | 4045197158451 | |
| Manufacturer number | 589010 41 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Robust unbreakable construction with variable toothing on flexible special steel body (bimetal). The reinforced stiff base is equipped with thread and drive pin holes (from ⌀ 32 mm) for secure mounting on the arbor. The high quality of the HSS teeth, the teeth geometry and the tight manufacturing tolerances guarantee the best cutting performance and tool life.
- Vario toothing 4/6 tpi for low vibration.
- Maximum depth of cut for all sizes 38 mm.
- Precision ground teeth – very quick sawing and clean cut edges.
Application:
On pillar drills, lathes or hand-held power drills at the appropriate speed. For cutting circular holes from thin-walled to thick-walled material with a flat or convex workpiece surface. Suitable for all materials such as steel, stainless steel, brass, copper, cast iron, light metal, wood, plasterboard and plastic panels etc. Use of lubricant will give increased tool life (metals).
Recommendation:
The use of cutting oil such as No. 084205 size 0.25 extends the service life and permits more rapid progress through the material.