{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 563240 115
CerRapid cutting disc extra thin, steel, stainless steel, Disc ⌀: 115mm
Article no.: 563256 115
Article code:
Product details
Technical Data
| Manufacturer’s designation | CerRapid | |
| Packaging | loose | |
| Guideline / labelling | CE mark | |
| Content | 1 pcs. | |
| Description of shape | straight | |
| Diameter | 115 mm | |
| Width of disc | 1 mm | |
| Backing pad | glass fibre | |
| Propulsive equipment | angle grinder | |
| Holder | hole | |
| Diameter of hole | 22.23 mm | |
| Max. circumferential speed | 80 m/s | |
| Min. recommended approach angle | 90 degrees | |
| Max. recommended approach angle | 90 degrees | |
| Max. speed | 13,300 min-1 | |
| Grinding media backing | Glass fibre | |
| Shape | 41 | |
| Binding | resin and artificial resin | |
| Min. thickness of material | 3 mm | |
| Max. thickness of material | 5 mm | |
| Contents unit | pieces | |
| Type of product | cutting disc | |
| Abrasive media | ceramic grit (CER) | |
| Specification | CER60Q-BF | |
| Suitable for material | stainless steel; steel | |
| Material group | metal | |
| Max. iron, sulphur and chlorine constituents | 0.1 % |
Identification & Classification
| Article number | 563256 115 | |
| EAN / GTIN | 4062406162313 | |
| Manufacturer number | 563256 115 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
Self-sharpening ceramic grit (CER) and the specially matched high-performance binding system enable performance that is many times better, with extremely cool grinding compared to conventional cutting discs (A).
- Very high productivity thanks to very quick separating cuts.
- Optimum balance between extremely soft cutting behaviour with very low application force and very long working life.
Specification:
CER60Q-BF.
Note:
The disc thickness should be at least 20% of the material thickness to be cut.