{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Fine thread “Go” / “No Go” plug gauge 6H, M × pitch: 30X2
Article no.: 486100 30X2
Article code:
Product details
Technical Data
| Guideline / labelling | None | |
| ESD protected area (EPA) | no | |
| EX area | no | |
| Type of gauge | go Gauge (GO); no-go gauge (NO-GO) | |
| Min. nominal dimension | 30 mm | |
| Max. nominal dimension | 30 mm | |
| Thread type | MF | |
| Thread | M30×2 | |
| Thread pitch | 2 mm | |
| Thread diameter | 30 mm | |
| Tolerance zone | H | |
| Degree of tolerance (quality) | 6 | |
| Configurable | no | |
| Type of product | thread plug gauge | |
| Content | single part | |
| Standard | DIN 13; DIN 2240; DIN 2279 − 2299; DIN ISO 1502 | |
| Can be calibrated | yes |
Identification & Classification
| Article number | 486100 30X2 | |
| EAN / GTIN | 2050001675552 | |
| Manufacturer number | 0090..30.....6H | |
| Manufacturer/responsible person | Lehren- u. Messgerätewerk Schmalkalden GmbH, Wilhelm-Külz-Straße 49, 98574 Schmalkalden, Germany, www.lehrmess.de |
Description
Version:
The ground first thread lead chamfer (from 1 mm pitch) removes contamination in the component and prevents premature fracture of the first full thread lead chamfer.
Design to DIN 2279 − 2299.
“Go” and “No Go” ends on a single handle (DIN 2240, part 1 form R). “No Go” end marked red.
Design to DIN 2279 − 2299.
“Go” and “No Go” ends on a single handle (DIN 2240, part 1 form R). “No Go” end marked red.
Application:
For metric ISO fine threads, right-hand DIN 13.
Standard:
Tolerances and dimensions to DIN ISO 1502.
Note:
Thread gauges for threads with other pitches, Whitworth, trapezoidal, round, UNC, UNF, and NPT threads as well as left-hand threads available on request.