{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable drill toolholder VARIA VX4, VX4, Clamping range ⌀ D1: 6mm
Article no.: 319827 6
Article code:
Product details
Technical Data
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Vollbohrerhalter VARIA VX4 Spann-D 6 mm | |
| Interface coding | EWC00400295 | |
| Interface on machine side | VX4 | |
| Min. clamping diameter | 6 mm | |
| Max. clamping diameter | 6 mm | |
| External diameter, tool-end | 25 mm | |
| Body length (tool side) | 30 mm | |
| Machining strategy | finishing; roughing | |
| Vibration damping | no | |
| Pendular compensation | no | |
| Tightening torque | 5.7 Nm | |
| Interface | joint 1; joint 2 | |
| Type of product | side lock arbor | |
| Shape | VX4 | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 319827 6 | |
| EAN / GTIN | 2050001742599 | |
| Manufacturer number | S05087 | |
| Manufacturer/responsible person | EWS Weigele GmbH & Co. KG, Maybachstraße 1, 73066 Uhingen, Germany, www.ews-tools.de |
Description
Version:
VX − Three-point clamping of the integral segment ring, free of transverse forces. Polygon torque resistance up to 200 Nm.
Advantage:
- Quick change using a single clamping point, therefore tool change without risk of injury.
- Cutter tools lie pre-set at the machine.
- Compact design - low unit costs.
Application:
For clamping tools with drive flats.
Note:
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop.
Extra short version available on request. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.
Extra short version available on request. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.