{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Three-jaw lathe chuck steel with recessed mount, DIN 702-4, External ⌀ A: 160mm
Article no.: 310505 160
Article code:
Product details
Technical Data
| Number of jaws | 3 pcs. | |
| Outer diameter | 160 mm | |
| Height without jaws | 65 mm | |
| Height with jaws | 91 mm | |
| Aperture diameter | 42 mm | |
| Centring diameter | 125 mm | |
| Centring hole depth | 4 mm | |
| Shape of width across flats | Square | |
| Square | 10 mm | |
| Max. speed | 4,600 min-1 | |
| With stud | yes | |
| Type of product | lathe chuck | |
| Material | Steel | |
| Standard | DIN 702-4 | |
| Operation | manual | |
| Weight | 8.8 kg | |
| Content | single part |
Identification & Classification
| Article number | 310505 160 | |
| EAN / GTIN | 4019208526997 | |
| Manufacturer number | 185303 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Deutschland, www.roehm.biz |
Description
Version:
- Manual chucks with gear scroll, centrically clamping.
- Weight-reduced body of steel.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- High concentricity.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the rear. The flange blanks must always be fitted first to the machine and then to the chuck.
Standard:
DIN 702-4.
Supplied with:
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard inside jaws, stepped on the inside.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard inside jaws, stepped on the inside.