{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Self-centring lathe chuck with base and hard top jaws DIN 702-4
Article no.: 313120
Article code:
Description
Version:
- Maximum concentricity and changeover accuracy.
- With jaw retention, centrically clamping.
- Large pass-through diameter.
- Accuracy twice that specified by DIN 6386.
- High clamping force with low force exertion.
- Higher speeds thanks to safety blocking slide.
- Jaws can quickly and easily be reversed or exchanged.
- Outer contour with drop-off wedge for water.
- Grease nipple for greasing all sliding faces.
Advantage:
Wherever extremely high clamping forces, high concentricity, and reliable continuous repeatability are required.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the front. The flange blanks must always be fitted first to the machine and then to the chuck.
Material:
Entirely made of steel, fully surface-hardened.
Supplied with:
Includes: 1 set of jaws, 1 chuck key, 1 set fastening screws.
Note:
Bore E can be bored out: Size 160 to 45 mm, size 200 to 55 mm, size 250 to 75 mm, size 315 to 102 mm (at additional charge).