{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-F 63 A = 120, Clamping range ⌀ D1: 3mm
Article no.: 308193 3
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Interface coding | HSK06300495 | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot | |
| Min. clamping diameter | 3 mm | |
| Max. clamping diameter | 3 mm | |
| Gauge length | 120 mm | |
| External diameter, tool-end | 10 mm | |
| Body length (tool side) | 63.5 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Vibration damping | no | |
| Tool pull-out protection | no | |
| Pendular compensation | no | |
| Incl. length adjustment screw | no | |
| With tapped holes for balancing | no | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Coolant channel bore can be plugged | no | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length | 145 mm | |
| Overall height | 63 mm | |
| Overall width | 63 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | F | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 308193 3 | |
| EAN / GTIN | 4045197588074 | |
| Manufacturer number | 308193 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Sizes 3 − 5 for carbide, from size 6 for HSS and carbide.
- With RFID/Balluffchip bore.
GARANT: HSK mating faces machined. All shanks hard turned (for smooth running!).
Without tapped holes for balancing screws and without thread for coolant pipe.
Integral length adjustment of the tool from clamping ⌀ D1 6 mm (adjustment travel 10 mm).
Application:
- For holding end mills and drills with parallel shank to h6 tolerance.
- Suitable for inductive, contact and hot air shrink-fit units.
Supplied with:
For chucks with length adjustment including a length adjustment screw (from clamping ⌀ D1 6 mm).