{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Performance milling chuck with cooling channel bores, HSK-A 100 short, Clamping ⌀ D1: 6mm
Article no.: 304460 6
Article code:
Click to enlarge image
Click to enlarge image
Spring in the base body presses the milling cutter or HB shank into the correct position.Contact piece on the tightening screw holds the milling cutter in the HB face.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially angled and adjustable | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Interface coding | HSK10000195 | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 1000 | |
| Type of mounting | spigot | |
| With cooling channel bore | yes | |
| Number of cooling channel bores | 4 pcs. | |
| Interface | joint 1; joint 2 | |
| Type of product | side lock arbor; side lock arbor | |
| Overall height H1 | 27.5 mm | |
| Overall width B1 | 27.5 mm | |
| Standard | DIN 69882-4; DIN 69893; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 304460 6 | |
| EAN / GTIN | 4062406114725 | |
| Manufacturer number | 304460 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- With RFID/Balluffchip bore.
- All shanks hard turned.
- Supplied with 4 table cooling channel bores.
Advantage:
- No risk of the cutter being pulled out, not even a tug.
- Optimised external contour − vibration-damping behaviour.
- Pleasant handling thanks to the differential thread.
- Breakage of the milling cutter shank is improbable.
- Precision version.
Application:
For clamping tools with side drive flats to DIN 1835 Form B and DIN 6535 Form HB. Best suited for TPC milling or high feed rate applications. No risk of the cutter being pulled out, more precise radial run-out, process reliability!
Optional extras:
Coolant pipe No. 309880, coolant pipe wrench No. 309890