{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Arbor for indexable drills Form ADB, BT 50, for shank ⌀ D1: 40mm
Article no.: 303129 40
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Werkzeughalter für Vollbohrer | |
| Interface position | on the machine; on the workpiece | |
| Holder type | ISO taper; plain shank | |
| Interface coding | SKG05005715; ZYL04000115 | |
| Holder shape | MAS BT; plain shank | |
| Holder version | dimensionless nominal size with cooling; metric | |
| Holder size, metric | 40 mm | |
| Holder size, no dimensions | 50 | |
| Type of mounting | spigot; hole (internal mounting) | |
| Holder tolerance class | H5 | |
| Shank diameter DS | 40 mm | |
| Interface on machine side | BT 50 | |
| Interface on workpiece side | shank diameter = 40 mm | |
| Gauge length A | 100 mm | |
| External diameter, on the tool side D | 60 mm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC | |
| Interface | joint 1; joint 2 | |
| Type of product | arbor | |
| Overall length L | 201.8 mm | |
| Standard | ISO 7388-2; JIS B6339 | |
| Shape | ADB | |
| Through-coolant available | yes | |
| Material | steel | |
| Surface treatment | ground; hardened | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 303129 40 | |
| EAN / GTIN | 4062406105228 | |
| Manufacturer number | 303129 40 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- All shanks hard turned.
- Position of the grub screw for countersinking in the indexable drill offset by 0.4 mm.
- When tightening the increased contact face ⌀ is clamped against the front face of the arbor.
- Better support, allowing higher feed rates.
- High concentricity thanks to the mating surface being ground flat to 3µm.
Application:
For mounting all standard indexable drills to DIN 6595, Part 1.
Suitable for:
All indexable drills with parallel shank to DIN 6595, Part 1.