{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning VBMW 110304, CBN (5° / 7°)
Article no.: 265774 M
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | BUX220; VBMW 110304 | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable | |
| Base form | rhombic | |
| Insert width | 10.2 mm | |
| Blade thickness | 3.18 mm | |
| Insert length | 10.2 mm | |
| Insert version | neutral | |
| Cutting edge length | 10.2 mm | |
| Insert diameter | 6.35 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 35 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 5 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 5 degrees | |
| Normal clearance angle (flat cutting edge) | 5 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | VBMW 110304 | |
| Tool material | BN | |
| Cutting media, manufacturer’s designation | CBN | |
| Grade | BUX220 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | other | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 1 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 265774 M | |
| EAN / GTIN | 4045197818140 | |
| Manufacturer number | 265774 M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
H
Description
Version:
- Disposable insert.
- Single cutting edge.
Note:
Further indexable insert shapes, sizes and corner radii available on request.