{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DNGA 150604, ceramic (0°)
Article no.: 255716 HART
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | DNGA 150604 | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable | |
| Base form | rhombic | |
| Insert width | 12.7 mm | |
| Blade thickness | 6.35 mm | |
| Insert length | 15.875 mm | |
| Insert version | neutral | |
| Cutting edge length | 15.875 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 0 degrees | |
| ISO-Code | DNGA 150604 | |
| Tool material | HC | |
| Machining group | H (hard materials); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | KB7205 | |
| Coating | coated | |
| Grade | KB7205 | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | DNGA 150604 | |
| Insert designation | DNGA 150604 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H); heat-resistant super-alloys (S) | |
| Tolerance Class | G | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 4 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 255716 HART | |
| EAN / GTIN | 4045197511478 | |
| Manufacturer number | 255716 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
H
H
K
N
Description
Version:
High quality, high-temperature ceramic tool material for reliable operation on materials that are hard and difficult to machine.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.