{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Pentron® indexable drill with ABS® shank, for indexable inserts SOGX
Article no.: 236603 23
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | KUB Pentron® | |
| Manufacturer’s designation | KOMET KUB Pentron® Wendeplatten-Vollbohrer | |
| Interface position | on the machine | |
| Holder type | modular taper interface with running track ball system | |
| Interface coding | ABS05000115 | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 0500 | |
| Type of mounting | spigot | |
| Shank diameter | 50 mm | |
| Shank length | 31 mm | |
| Cutter diameter, min. | 23 mm | |
| Body diameter | 50 mm | |
| Flute length | 109 mm | |
| Distance from cutter corner to cutter tip | 0.35 mm | |
| Number of cutting edges, total | 1 | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 90 degrees | |
| Guide elements | without guide elements | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SO07T2083N | |
| Insert designation | SOGX 07T208 20-... | |
| Interface | joint 1 | |
| Gauge length | 124 mm | |
| Usable length | 92 mm | |
| Overall length | 155 mm | |
| Weight | 560 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Machining strategy | HPC | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 236603 23 | |
| EAN / GTIN | 4047109181656 | |
| Manufacturer number | U44 52300 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Description
Version:
Bore tolerance: D − 0.1 / + 0.3
Application:
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.