{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable drill with combination shank, for indexable inserts WOEX
Article no.: 232298 19
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially angled | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL02501415 | |
| Holder shape | with longitudinal slot | |
| Holder version | metric | |
| Holder size, metric | 0200 mm | |
| Shank diameter | 20 mm | |
| Shank length | 50 mm | |
| Cutter diameter, min. | 19 mm | |
| Flute length | 58 mm | |
| Distance from cutter corner to cutter tip | 0.94 mm | |
| Number of cutting edges, total | 1 | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 158 degrees | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WO0302043N | |
| Insert designation | WOEX030204 | |
| Interface | joint 1 | |
| Gauge length | 62 mm | |
| Usable length | 38 mm | |
| Overall length | 112 mm | |
| Weight | 209 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material | |
| Machining strategy | MTC | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 232298 19 | |
| EAN / GTIN | 4045197676917 | |
| Manufacturer number | 232298 19 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 030204.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).