{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BDMT 170431 ER-JT, for indexable milling cutters, PR1825
Article no.: 227558 ST1400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | BDMT 170431 ER-JT | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rhombic | |
| Insert width | 9.6 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 17 mm | |
| Insert version | right-hand | |
| Cutting edge length | 17 mm | |
| Cutting edge height | 4.9 mm | |
| Corner radius | 3.1 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 80 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 18 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | BDMT 170431 ER-JT | |
| Attachment hole diameter | 3 mm | |
| Type of chip breaker | EL-U | |
| Tool material | HC-P25 | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Coating | Megacoat Nano | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | BD1704313R | |
| Interface coding for insert according to ISO TS 13399-60 | BD1704313R | |
| Insert designation | BDMT170431 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 7 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 227558 ST1400 | |
| EAN / GTIN | 4960664028047 | |
| Manufacturer number | BDMT170431ER-JTPR1825 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
180
P
140
P
140
M
180
M
180
Description
Note:
Standard application values for ae = 0.3×D.
Exactly 90° up to ap = 9 mm.
Exactly 90° up to ap = 9 mm.