{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SPGT 09T308, HU7815
Article no.: 218325 ALU
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HU7815; SPGT 09T308 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 9 mm | |
| Blade thickness | 3.97 mm | |
| Insert length | 9 mm | |
| Insert version | neutral | |
| Cutting edge length | 9 mm | |
| Cutting edge height | 3.97 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 0.8 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Normal clearance angle (flat cutting edge) | 11 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SPGT 09T308 | |
| Attachment hole diameter | 3.97 mm | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HU7815 | |
| Coating | uncoated | |
| Grade | HU7815 | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SP09T3083N | |
| Interface coding for insert according to ISO TS 13399-60 | SP09T3083N | |
| Insert designation | SPGT 09T308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 4 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 218325 ALU | |
| EAN / GTIN | 4045197765468 | |
| Manufacturer number | 218325 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
750
N
700
N
600
