{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOEU 130708 TR-M, for GARANT Power Tang, HB735
Article no.: 215151 UNI
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | LOEU 130708 TR-M | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rectangular | |
| Insert width | 13.3 mm | |
| Blade thickness | 7.94 mm | |
| Insert length | 14.2 mm | |
| Insert version | neutral | |
| Cutting edge length | 14.2 mm | |
| Cutting edge height | 7.5 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 77 degrees | |
| Rake angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 2 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 13.5 mm | |
| ISO-Code | LOEU 130708 TR-M | |
| Type of chip breaker | AM | |
| Tool material | Carbide | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | UNI | |
| Cutting media, manufacturer’s designation | HB735 | |
| Coating | PVD | |
| Grade | HB735 | |
| Insert thickness | 7.94 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | LOEU 130708 TR-M | |
| Interface coding for insert according to ISO TS 13399-60 | LO1307083R | |
| Insert designation | LOEU 130708 TR-M | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Universal | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | clamping | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 100 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 215151 UNI | |
| EAN / GTIN | 4045197866899 | |
| Manufacturer number | 215151 UNI | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
P
160
P
130
P
100
P
70
M
110
M
90
S
40
K
200
Description
Note:
Standard application values for ae = 0.3×D / ap = 10 mm