{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling with wide wiper edge, for Aluking tangential high-performance face mills / end mills, HB7535
Article no.: 214565 ST1400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | ST1400 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert version | neutral | |
| ISO-Code | Breitschlichtplatte | |
| Wiper length axial | 5 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | HB7535 | |
| Cutting media, manufacturer’s designation | HB7535 | |
| Coating | coated | |
| Grade | HB7535 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 8 pcs. | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 214565 ST1400 | |
| EAN / GTIN | 4045197940155 | |
| Manufacturer number | 214565 ST1400 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
750
N
750
N
300
Description
Version:
Carbide indexable inserts with wide wiper edge for fitting on adjustable insert seatings. Length of the flat chamfer: 5 mm.