{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SPKN 1203 EDSR, for face mill arbors, HB7535
Article no.: 213540 INOX
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SPKN 1203 EDSR | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert | 12.7 mm | |
| Thickness of the insert | 3.18 mm | |
| Length of cutting insert | 12.7 mm | |
| Insert version | right-hand | |
| Length of cutting edge | 12.7 mm | |
| Diameter of the cutting insert | 12.7 mm | |
| Corner radius | 0 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 5 mm | |
| ISO-Code | SPKN 1203 EDSR | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | M (stainless steel) | |
| Tool application group | SP1203ED1R | |
| Cutting media, manufacturer’s designation | HB7535 | |
| Coating | TiN | |
| Grade | HB7535 | |
| Insert thickness | 3.18 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | SPKN 1203 EDSR | |
| Interface coding for insert according to ISO TS 13399-60 | SP1203ED1R | |
| Insert designation | SPKN 1203 EDSR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | clamping | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 7 g | |
| Content | 10 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 213540 INOX | |
| EAN / GTIN | 4045197319333 | |
| Manufacturer number | 213540 INOX | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
500
N
400
P
250
P
250
P
250
P
140
P
110
M
70
M
50
K
200
Description
Application:
Milling insert for indexable milling cutter No. 213100.