{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling RDMW 12T3 MOTN, for copy and face milling cutters, HB7505
Article no.: 212275 HART
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | RDMW 12T3 MOTN | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | round | |
| Blade thickness | 3.97 mm | |
| Insert length | 12 mm | |
| Insert version | neutral | |
| Cutting edge length | 12 mm | |
| Insert diameter | 12 mm | |
| Corner radius | 6 mm | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | RDMW 12T3 MOTN | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | HB7505 | |
| Coating | CVD | |
| Grade | HB7505 | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | RD12T3M03N | |
| Interface coding for insert according to ISO TS 13399-60 | RD12T3M03N | |
| Insert designation | RDMW 12T3 MOTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 1 pcs. | |
| Weight | 1 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212275 HART | |
| EAN / GTIN | 4045197302526 | |
| Manufacturer number | 212275 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
275
P
275
P
250
P
160
P
125
H
155
H
140
H
110
K
240
Description
Version:
All indexable inserts are suitable for use with carriers that are 0° negative and also with carriers that are 7° positive.
Note:
Standard application values for ae = 0.3×D / apmax = 2.5 mm.