{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Milling head, 45° chamfer HPC, uncoated, ⌀ D h10: 20mm
Article no.: 210350 20
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | TopCut | |
| Manufacturer’s designation | Fräskopf, 45° Fase | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | HU730 | |
| Coating | uncoated | |
| Grade | HU730 | |
| Gauge length A | 35 mm | |
| Overall length L | 57.2 mm | |
| Weight | 160 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Machining strategy | HPC | |
| Cutter diameter D1 | 20 mm | |
| Tolerance class | h10 | |
| Cutting edge length L1 | 20 mm | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Plunge angle max. | 5 degrees | |
| Plunge depth max. | 10 mm | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of effective cutters (end face) | 3 | |
| Twist direction | right-hand | |
| Helix angle | 42 degrees | |
| Corner version | as chamfer | |
| Corner chamfer width b | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.4 mm | |
| Max. cutting depth L2 | 20 mm; 20 mm | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 210350 20 | |
| EAN / GTIN | 4045197523419 | |
| Manufacturer number | 210350 20 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
530
N
500
N
450
N
320
Description
Note:
Standard application values for slots milled from solid at ap max≤ 0.5×D.