{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide roughing end mill, short HPC, TiAlN, ⌀ d11 DC: 8mm
Article no.: 205482 8
Article code:
Product details
Technical Data
| Coating | TiAlN | |
| Machining strategy | HPC | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 8 mm | |
| Cutting edge length Lc | 11 mm | |
| Overall length L | 58 mm | |
| Shank diameter DS | 8 mm | |
| Twist angle | 30 degrees | |
| Tolerance class | d11 | |
| Corner chamfer width | 0.3 mm | |
| Tool material | solid carbide | |
| Gauge length A | 22 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.045 mm | |
| Max. cutting depth, Full slot milling | 8 mm | |
| Max. cutting depth, Side milling | 11 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.04 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00801005 | |
| Holder version | metric | |
| Holder size, metric | 8 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Length of shank LS | 36 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Schruppfräser kurz HPC | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Recess diameter D1 | 7.5 mm | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | HR | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Interface | joint 1 | |
| Weight | 38 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | green | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.5 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 205482 8 | |
| EAN / GTIN | 4045197551665 | |
| Manufacturer number | 205482 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
H
35
M
60
M
50
K
90
Description
Wykonanie:
Wymiary konstrukcyjne podobne do DIN 6527.
Do wysokich szybkości posuwu, bardzo wysoka wydajność skrawania.
Ze specjalnym profilem radełkowanym.
Do wysokich szybkości posuwu, bardzo wysoka wydajność skrawania.
Ze specjalnym profilem radełkowanym.
Wskazówka:
DOSTĘPNA NOWA GENERACJA!
Zalecany nowy wyrób zamienny nr 205548.
Zalecany nowy wyrób zamienny nr 205548.