{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide end mill with internal coolant supply HPC, ZOX, ⌀ f8 DC: 4mm
Article no.: 202553 4
Article code:
Product details
Technical Data
| Coating | ZOX | |
| Machining strategy | HPC | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Cutter diameter Dc | 4 mm | |
| Cutting edge length Lc | 8 mm | |
| Overall length L | 57 mm | |
| Shank diameter DS | 6 mm | |
| Twist angle | 45 degrees | |
| Tolerance class | f8 | |
| Max. cutting depth L2 | 2 mm; 8 mm | |
| Corner chamfer width | 0.1 mm | |
| Tool material | HC-N10 | |
| Gauge length A | 21 mm | |
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Fräser mit Innenkühlung | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder tolerance class | h6 | |
| Length of shank LS | 36 mm | |
| Holder diameter, upper dimension | 0 mm | |
| Holder diameter, lower dimension | -0.008 mm | |
| Shank type | HA | |
| Cutting media, manufacturer’s designation | VHM Vipr-Gold | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Recess diameter D1 | 3.7 mm | |
| Head length L3 | 8 mm | |
| Shoulder length | 14 mm | |
| ISO milling cutter type | L | |
| Balancing quality | G2,5 | |
| Relief angle | 11 degrees | |
| Side rake angle | 13 degrees | |
| Number of effective cutters (end face) Z | 4 | |
| Twist direction | right-hand | |
| Helical pitch | 12.566 mm | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Functional length | 8 mm | |
| Max. speed | 45,000 min-1 | |
| Weight | 19 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | face milling (FPL); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.1 mm |
Identification & Classification
| Article number | 202553 4 | |
| EAN / GTIN | 4045197454386 | |
| Manufacturer number | 202553 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
480
N
240
N
240
N
Description
Version:
Sturdy roughing end mills without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.