{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide milling cutters, DLC, ⌀ h10 DC: 1mm
Article no.: 201046 1
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h10
- No. of teeth Z: 1
Product details
Technical Data
| Cutting edge ⌀ DC | 1 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 1 | |
| Helix angle | 26 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 8 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 3 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.004 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
201046 1
Copy |
|
| EAN / GTIN |
4045197964748
Copy |
|
| Manufacturer number |
201046 1
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
440
suitable for / [m/min]
N
ISO code:
400
suitable for / [m/min]
N
ISO code:
360
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
N
ISO code:
150
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
N
ISO code:
140
suitable for / [m/min]
N
ISO code:
120
suitable for / [m/min]
N
ISO code:
170
suitable for / [m/min]
N
ISO code:
150
suitable for / [m/min]
N
ISO code:
140
suitable for / [m/min]
N
ISO code:
120
suitable for / [m/min]
N
ISO code:
150
suitable for / [m/min]
N
ISO code:
280
suitable for / [m/min]
N
ISO code:
150
suitable for / [m/min]
N
ISO code:
190
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Large flute section for unobstructed swarf evacuation.
Special geometry for machining aluminium.
With the latest generation of DLC coating sp2.
Special geometry for machining aluminium.
With the latest generation of DLC coating sp2.
Application:
Especially for milling aluminium, plunging and contour milling.