{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide slot drill, DLC, ⌀ h10 DC: 12mm
Article no.: 201045 12
Article code:
Product details
Technical Data
| Coating | DLC | |
| Number of effective cutters (peripheral side) Z | 1 | |
| Cutter diameter Dc | 12 mm | |
| Cutting edge length Lc | 30 mm | |
| Overall length L | 80 mm | |
| Shank diameter DS | 12 mm | |
| Twist angle | 26 degrees | |
| Tolerance class | h10 | |
| Tool material | solid carbide | |
| Gauge length A | 40 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Full slot milling | 12 mm | |
| Max. cutting depth, Side milling | 30 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.05 mm | |
| Eingriffsbreite max. ae | 1×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01200105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 12 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Length of shank LS | 40 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Fräser, DLC | |
| Machining group | N (non-ferrous metals); O (other) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Corner / edge | 1 | |
| Corner chamfer angle | 90 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 1 | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM DLC | |
| Vorschub pro Zahn in | alu short-chipping | |
| Interface | joint 1 | |
| Weight | 102 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | countersinking (plunge milling) (FSE); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 201045 12 | |
| EAN / GTIN | 4045197706430 | |
| Manufacturer number | 201045 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
Large flutes for unobstructed swarf evacuation.
Special geometry for machining aluminium.
With the latest generation of DLC coating sp2.
Special geometry for machining aluminium.
With the latest generation of DLC coating sp2.
Application:
Especially for milling aluminium, plunging and contour milling.