{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Roughing end mill HSS-Co8, TiAlN, ⌀ k12 DC: 13mm
Article no.: 192605 13
Article code:
Product details
Technical Data
| Coating | TiAlN | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Cutter diameter Dc | 13 mm | |
| Cutting edge length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Diameter of shaft DS | 12 mm | |
| Twist angle | 30 degrees | |
| Tolerance class | k12 | |
| Corner chamfer width | 0.5 mm | |
| Tool material | HSS Co 8 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 13 mm | |
| Max. cutting depth, Side milling | 26 mm | |
| Wet maximum | suitable | |
| Feed rate per tooth slot cutting fz | 0.021 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01201005 | |
| Holder shape | form B | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schruppfräser | |
| Machining group | M (stainless steel); P (steel) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Twist direction | right-hand | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | NR | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Feed rate per tooth in | steel < 750 N/mm2 | |
| Interface | joint 1 | |
| Tolerance class | k12 | |
| Functional length | 60.5 mm | |
| Weight | 65 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Shape letter standard number | B | |
| Data carriers | without data carrier | |
| Machining method | countersinking (plunge milling) (FSE); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 192605 13 | |
| EAN / GTIN | 4069515007016 | |
| Manufacturer number | 192605 13 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
120
P
781
P
55
P
55
P
29
P
25
M
17
M
14
K
46
N
90
Description
Version:
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
End face geometry for plunging and unequal spacing of the teeth.
Sizes 6M to 25M – MID mills. Dimensions to factory standard, between DIN 844 shortand DIN 844 long.
End face geometry for plunging and unequal spacing of the teeth.
Sizes 6M to 25M – MID mills. Dimensions to factory standard, between DIN 844 shortand DIN 844 long.