{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
End mill HSS-E-SPM HPC, TiAlN, ⌀ DC: 3mm
Article no.: 191637 3
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL00601005 | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 37.47 mm | |
| Holder diameter, ISO tolerance class | 6 mm | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Tool material | HSS-E-PM | |
| Machining group | M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E-SPM | |
| Coating | TiAlN | |
| Cutter diameter | 3 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Upper dimension | 0 mm | |
| Lower dimension | -0.03 mm | |
| Cutting edge length | 8 mm | |
| Head length | 8 mm | |
| ISO milling cutter type | End / face mill | |
| Relief angle | 2.5 degrees | |
| Side rake angle | 7 degrees | |
| Number of effective cutters, peripheral side | 4 | |
| Number of effective cutters, end face | 4 | |
| Twist direction | right-hand | |
| Twist angle | 38 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 24.53 mm | |
| Usable length | 8 mm | |
| Functional length | 0 mm | |
| Weight | 8 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Machining method | End milling; face milling; slot milling | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 4.5 mm; 8 mm |
Identification & Classification
| Article number | 191637 3 | |
| EAN / GTIN | 4045197838186 | |
| Manufacturer number | 191637 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
74
P
64
P
42
P
32
M
26
M
21
Description
Version:
Very high-performance substrate for machining steel and stainless steel materials.