{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Metal circular saw blade fine, uncoated, ⌀×thickness: 40X0,2mm
Article no.: 175000 40X0,2
Article code:
Click to enlarge image
Click to enlarge image
Arbors for saw blades ⌀ 20 - 100 mm see No. 345510 / 345555
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Tool material | HSS | |
| Coating | uncoated | |
| Tool version | solid steel | |
| Cutter diameter Dc | 40 mm | |
| Diameter of mounting hole D3 | 10 mm | |
| Cutting width B | 0.2 mm | |
| Number of cutters (peripheral side) Z | 128 | |
| Tooth form | Wz | |
| Standard | DIN 1837 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Interface position | on the machine | |
| Holder type | milling arbor mounting | |
| Type of mounting | hole (internal mounting) | |
| Arbor size | 10 | |
| Cooling lubricant | yes | |
| Setting angle | 90 degrees | |
| Interface | joint 1 | |
| Cutting direction | right-hand cutting | |
| Shape letter standard number | A | |
| Machining method | parting-off milling (FTR) | |
| Type of product | circular saw blade | |
| Maximum cutting depth | 10.25 mm | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 175000 40X0,2 | |
| EAN / GTIN | 4045197242471 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Description
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
Application:
For thin-walled components and small cutting depths.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.