{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Metal circular saw blade fine, uncoated, ⌀×thickness: 100X2,5mm
Article no.: 175000 100X2,5
Article code:
Click to enlarge image
Click to enlarge image
Arbors for saw blades ⌀ 20 - 100 mm see No. 345510 / 345555
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Metallkreissägeblatt fein, unbeschichtet | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 100 mm | |
| Diameter of mounting hole | 22 mm | |
| Cutting width | 2.5 mm | |
| ISO milling cutter type | N | |
| Indstillingsvinkel | 90 grader | |
| Hældningsvinkel | 0 grader | |
| Sidehældningsvinkel | 0 grader | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) | 100 | |
| Tooth pitch | 3.14 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Machining group | P (steel) | |
| Skærestof, producentbetegnelse | HSS | |
| Coating | uncoated | |
| Nyttelængde | 30,25 mm | |
| Vægt | 135 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 1837 | |
| Shape letter standard number | A | |
| Medie | without data carrier | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Korrektionsfaktor fz | 1,5 | |
| Skæredybde maks. | 30,25 mm |
Identification & Classification
| Article number | 175000 100X2,5 | |
| EAN / GTIN | 4045197243157 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Description
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
Application:
For thin-walled components and small cutting depths.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.