{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap Alu machine tap extra long, DLC, M: M8
Article no.: 134265 M8
Article code:
Product details
Technical Data
| Thread type | metric ISO coarse thread | |
| Tool material | HSS-E-PM | |
| Coating | DLC | |
| Thread D | M8x1,25 | |
| Thread pitch | 1.25 mm | |
| Core hole diameter | 6.8 mm | |
| Nominal diameter of metric thread D | 8 mm | |
| Overall length L | 180 mm | |
| Shank diameter DS | 8 mm | |
| Square-drive width across flats □ | 6.2 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | E | |
| Application for type of drilling | blind hole | |
| Twist angle | 45 degrees | |
| Standard | Werksnorm | |
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Alu Maschinen-Gewindebohrer extra lang | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 132 mm | |
| Chisel edge diameter | 6.75 mm | |
| Length of tapping part Lc | 10.2 mm | |
| Tap infeed length | 1.875 mm | |
| Taper lead angle | 20.07 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Flank angle | 60 degrees | |
| Machining group | N (non-ferrous metals) | |
| Interface | joint 1 | |
| Gauge length A | 180 mm | |
| Usable length L1 | 24 mm | |
| Weight | 58 g | |
| Cutting direction | right-hand cutting | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | yellow | |
| Type of product | taps |
Identification & Classification
| Article number | 134265 M8 | |
| EAN / GTIN | 4067263830481 | |
| Manufacturer number | 134265 M8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
35
N
32
N
20
N
20
N
18
N
18
N
18
N
25
Description
Version:
High-performance tap, specially developed for aluminium and non-ferrous alloys. Dynamic helical pitch of the clamping slots ensure optimum chip evacuation and process reliability.
With extra long shank.
- HSS-E-PM tool material – for high cutting edge stability.
- Ultra-smooth DLC coating for wear resistance and avoidance of edge build-up.
- Dynamic helical pitch of the flutes.
- Short lead chamfer form E.
With extra long shank.