{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap HSS-E-PM, TiCN, M: M4
Article no.: 132055 M4
Article code:
Product details
Technical Data
| Thread type | M | |
| Tool material | HSS-E-PM | |
| Coating | TiCN | |
| Thread D | M4 | |
| Thread pitch | 0.7 mm | |
| Core hole diameter | 3.3 mm | |
| Nominal diameter of metric thread D | 4 mm | |
| Overall length L | 63 mm | |
| Shank diameter DS | 4.5 mm | |
| Square-drive width across flats □ | 3.4 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Application for type of drilling | through hole; blind hole | |
| Twist angle | 0 degrees | |
| Standard | DIN 371 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 39 mm | |
| Chisel edge diameter | 3.1 mm | |
| Length of tapping part Lc | 7 mm | |
| Tap infeed length | 3.5 mm | |
| Taper lead angle | 11 degrees | |
| Number of teeth | 2 | |
| Twist direction | neutral, straight | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 1.5; 1.5 | |
| Number of clamping slots | 2 | |
| Flank angle | 60 degrees | |
| Interface | joint 1 | |
| Weight | 6 g | |
| Cutting direction | right-hand cutting | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | red | |
| Type of product | taps |
Identification & Classification
| Article number | 132055 M4 | |
| EAN / GTIN | 4045197648686 | |
| Manufacturer number | 132055 M4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
12
P
7
H
2
H
4
H
3
H
2
N
15
Description
Ausführung:
Stabile Ausführung.
Empfehlung:
Wir empfehlen bei sehr harten Stählen, TOOLOX- und HARDOX-Materialien den Kernloch-⌀ abweichend der DIN-Angaben (siehe Tabelle) 0,05 bis 0,3 mm größer zu bohren. Einsatz nur mit Längenausgleichsfutter − auch bei Maschinen mit synchronisiertem Spindelantrieb.