{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap SteelHT machine tap HSS-E-PM Form B 6HX, TiCN, M: M10
Article no.: 131940 M10
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Steel HT Maschinen-Gewindebohrer | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL01000105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0100 mm | |
| Shank diameter | 10 mm | |
| Holder diameter, ISO tolerance class | 9 mm | |
| Thread type | M | |
| Thread nominal diameter metric | 10 mm | |
| Thread | M10X1.5 | |
| Number of thread turns | 16 | |
| Thread pitch | 1.5 mm | |
| Thread tolerance class | 6HX | |
| Chisel edge diameter | 8.31 mm | |
| Width across flats | 8 mm | |
| Length of tapping part | 26.1 mm | |
| Tap infeed length | 6.75 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Pilot pin | without guiding pin | |
| Application for type of drilling | Through hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 8.5 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats | 8 mm | |
| Tool material | HSS-E-PM | |
| Standard designation for cutting medium, 2nd Priority | HSS-E-PM | |
| Standard designation for cutting medium, 3rd Priority | HSS-E-PM | |
| Machining group | H (hard materials) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | TiCN | |
| Interface | joint 1 | |
| Gauge length | 51 mm | |
| Overall length | 100 mm | |
| Weight | 53 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 371 | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal | |
| Colour ring | red | |
| Type of product | Taps |
Identification & Classification
| Article number | 131940 M10 | |
| EAN / GTIN | 4062406236199 | |
| Manufacturer number | 131940 M10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
20
P
15
P
12
H
5
H
15
H
5
M
7
S
5
Description
Version:
High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials. Strong spiral point, for process stability at high cutting forces.
- HSS-E-PM tool material – for very high cutting edge stability.
- Optimised honed cutting edges.
- TiCN coating – for maximum wear protection.
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by selecting a larger tapping hole ⌀.