Plug-in adapter reducer 2
Article no.:
657949 2
- Exchangeable tool: Plug-in head
Product details
Technical Data
| Exchangeable tool | Plug-in head | |
| Width b | 28 mm | |
| Height h | 21 mm | |
| Series | 7370/40 | |
| for plug-in heads | 9×12 mm | |
| Pitch S | 21.5 mm | |
| Plug-in shank | 14×18 mm | |
| Type of product | Screwdriver set | |
| Article number | 657949 2 | |
| EAN / GTIN | 4018754161041 | |
| Manufacturer number | 58290040 |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!